Iterative Slepian-Wolf Decoding and FEC Decoding for Compress-and-Forward Systems

While many studies have concentrated on providing theoretical analysis for the relay assisted compress-and-forward systems little effort has yet been made to the construction and evaluation of a practical system. In this paper a practical CF system incorporating an error-resilient multilevel Slepian-Wolf decoder is introduced and a novel iterative processing structure which allows information exchanging between the Slepian-Wolf decoder and the forward error correction decoder of the main source message is proposed. In addition, a new quantization scheme is incorporated as well to avoid the complexity of the reconstruction of the relay signal at the final decoder of the destination. The results demonstrate that the iterative structure not only reduces the decoding loss of the Slepian-Wolf decoder, it also improves the decoding performance of the main message from the source

Coordinated initial access in millimetre wave standalone networks

In this paper, a novel coordinated initial access (IA) scheme for clustered millimeter wave small cells (mmSCs) is proposed for the fifth generation mobile communication networks (5G). This solution is a method for efficient and fast initial access for ultra-dense millimeter wave standalone networks without presence of overlaid legacy networks operating on lower frequency. In contrast to the current full beam sweep scheme, where time consuming exhaustive searching is employed, the mmSCs within one cluster will perform the IA procedure in a coordinated manner based on the power delay profile (PDP) measurement reports shared with each other via the backhaul links and thereby avoiding the full beam sweep. The proposed scheme significantly reduces the initial access time, enhances the access robustness and reduces the cost and complexity of the mobile terminals

H2-ARQ-relaying: spectrum and energy efficiency perspectives

In this paper, we propose novel Hybrid Automatic Repeat re-Quest (HARQ) strategies used in conjunction with hybrid relaying schemes, named as H2-ARQ-Relaying. The strategies allow the relay to dynamically switch between amplify-and-forward/compress-and-forward and decode-and-forward schemes according to its decoding status. The performance analysis is conducted from both the spectrum and energy efficiency perspectives. The spectrum efficiency of the proposed strategies, in terms of the maximum throughput, is significantly improved compared with their non-hybrid counterparts under the same constraints. The consumed energy per bit is optimized by manipulating the node activation time, the transmission energy and the power allocation between the source and the relay. The circuitry energy consumption of all involved nodes is taken into consideration. Numerical results shed light on how and when the energy efficiency can be improved in cooperative HARQ. For instance, cooperative HARQ is shown to be energy efficient in long distance transmission only. Furthermore, we consider the fact that the compress-and-forward scheme requires instantaneous signal to noise ratios of all three constituent links. However, this requirement can be impractical in some cases. In this regard, we introduce an improved strategy where only partial and affordable channel state information feedback is needed

Localized Mobility Management for SDN-Integrated LTE Backhaul Networks

Small cell (SCell) and Software Define Network (SDN) are two key enablers to meet the evolutional requirements of future telecommunication networks, but still on the initial study stage with lots of challenges faced. In this paper, the problem of mobility management in SDN-integrated LTE (Long Term Evolution) mobile backhaul network is investigated. An 802.1ad double tagging scheme is designed for traffic forwarding between Serving Gateway (S-GW) and SCell with QoS (Quality of Service) differentiation support. In addition, a dynamic localized forwarding scheme is proposed for packet delivery of the ongoing traffic session to facilitate the mobility of UE within a dense SCell network. With this proposal, the data packets of an ongoing session can be forwarded from the source SCell to the target SCell instead of switching the whole forwarding path, which can drastically save the path-switch signalling cost in this SDN network. Numerical results show that compared with traditional path switch policy, more than 50 signalling cost can be reduced, even considering the impact on the forwarding path deletion when session ceases. The performance of data delivery is also analysed, which demonstrates the introduced extra delivery cost is acceptable and even negligible in case of short forwarding chain or large backhaul latency

Semi-persistent RRC protocol for machine-type communication devices in LTE networks

In this paper, we investigate the design of a radio resource control (RRC) protocol in the framework of long-term evolution (LTE) of the 3rd Generation Partnership Project regarding provision of low cost/complexity and low energy consumption machine-type communication (MTC), which is an enabling technology for the emerging paradigm of the Internet of Things. Due to the nature and envisaged battery-operated long-life operation of MTC devices without human intervention, energy efficiency becomes extremely important. This paper elaborates the state-of-the-art approaches toward addressing the challenge in relation to the low energy consumption operation of MTC devices, and proposes a novel RRC protocol design, namely, semi-persistent RRC state transition (SPRST), where the RRC state transition is no longer triggered by incoming traffic but depends on pre-determined parameters based on the traffic pattern obtained by exploiting the network memory. The proposed RRC protocol can easily co-exist with the legacy RRC protocol in the LTE. The design criterion of SPRST is derived and the signalling procedure is investigated accordingly. Based upon the simulation results, it is shown that the SPRST significantly reduces both the energy consumption and the signalling overhead while at the same time guarantees the quality of service requirements